CompactPCI® PlusIO and CompactPCI® Serial capture the systems market

2011-08-27, Christian Ganninger

CompactPCI® Serial, combined with the CompactPCI® PlusIO defined as a migration path, are already showing a major market potential.

Users changing to the new technology from CompactPCI® have very diverse reasons for doing so. An application example in freight traffic shows a hybrid backplane with CompactPCI® PlusIO system slot used in conjunction with a conventional CompactPCI® backplane in one system. Here the hybrid backplane serves to accommodate future system upgrades so that faster CompactPCI® Serial boards can later be used.

Another application, in industrial automation, links a system via WLAN to the company net-work. In this arrangement the USB interface is used that is defined on the CompactPCI® Seri-al slots. A USB WLAN stick is mounted on a CompactPCI® Serial board and can be linked directly via the backplane to the CompactPCI® PlusIO processor board using the USB proto-col. This represents a simple and straightforward solution for linking the system to a network via WLAN.

In some railway applications and in industrial automation, hybrid backplanes are also begin-ning to be used for integrating hard disk boards simply into the system. CompactPCI® does not allow plug-in hard disk modules to be directly integrated, since in CompactPCI® only the PCI bus is implemented. However, current hard disk drives use the S-ATA or SAS protocols. CompactPCI® PlusIO and CompactPCI® Serial define both protocols on both slots, so that a hard disk drive on a periphery board can be connected to the system simply. This allows powerful Raid systems to be constructed simply.

Another example application of CompactPCI® Serial is a special use in audio processing. This makes use of the full-mesh topology of the Ethernet defined in the J6 area of CompactPCI® Serial. This allows audio data to be exchanged extremely fast between the individual digital signal processors. The free user-defined pins in the J2 to J5 range serve for future upgrades. Here the full-mesh topography of the J6 area is mirrored in order to increase the data volume further.

It can be seen from numerous enquiries that many more applications will shortly be imple-mented in many different areas of the market.

One of the areas of application: Railway systems

Christian Ganninger, Global Product Manager for Systems, Schroff® GmbH

German version on ElektronikPraxis: CompactPCI PlusIO und CompactPCI Serial erobern den Systemmarkt

Other Articles

» The Future is Serial: CompactPCI® Serial (2011-12-23)

» System Slot Boards with the Latest Intel® Architecture for CompactPCI® PlusIO and CompactPCI® Serial (2011-12-09)

» Legacy Interface Concept for CompactPCI® Serial (2011-12-02)

» Ethernet Switch Functionality for CompactPCI® Serial (2011-11-30)

» 6U CompactPCI® Parallel/Serial Hybrid Systems (2011-11-26)

» 6U Backplanes for CompactPCI® Serial (2011-11-23)

» Conductive Cooling with CompactPCI® Serial (2011-11-17)

» Connector Layout and Coding with CompactPCI® Serial (2011-11-02)

» High-Performance Graphics on CompactPCI® Serial (2011-10-21)

» Building Clusters with CompactPCI® Serial (2011-10-15)

» Mixed Doubles: CompactPCI® Serial and CompactPCI® 2.0 (2011-10-13)

» Application-Specific Backplane Architectures with CompactPCI® Serial (2011-09-16)

» Ethernet Extensions for CompactPCI® Serial (2011-09-02)

» CompactPCI® Serial for Safety-Relevant Architectures (2011-08-20)

» CompactPCI® Serial Ethernet Mesh Architecture (2011-08-06)

» CompactPCI® Serial Ethernet Star Architecture (2011-07-23)

» CompactPCI® Serial - Why is it a PICMG Standard? (2011-06-17)

» CompactPCI® Serial Star Topologies, Part 2 (2011-05-12)

» CompactPCI® Serial Star Topologies, Part 1 (2011-03-21)

» CompactPCI® Serial - The Guide Element (2011-03-10)

» Hot-Plug Functionality with CompactPCI® Serial, Part 2 (2011-02-05)

» Hot-Plug Functionality with CompactPCI® Serial, Part 1 (2011-02-03)

» XMC Carrier Board for CompactPCI® Serial (2010-12-23)

» Mezzanine Cards on CompactPCI® Serial (2010-12-22)

» PCI Express® Mini Card Carrier for CompactPCI® Serial (2010-12-21)

» USB Support with CompactPCI® Serial (2010-12-06)

» Physical Addressing with CompactPCI® Serial (2010-11-22)

» Standardized Rear I/O for CompactPCI® Systems Thanks to CompactPCI® PlusIO (2010-11-13)

» Rear I/O with 6U CompactPCI® Serial (2010-11-06)

» P0 Adds Power to CompactPCI® Serial on 6U (2010-10-30)

» CompactPCI® Serial in 6U Format (2010-10-23)

» Ecosystem for CompactPCI® Serial (CPCI-S.0) (2010-10-15)

» First Single-Board Computer according to CompactPCI® Serial Standard (2010-10-14)

» CompactPCI® Serial - a Base Specification (2010-10-08)

» Highly Networked Camera Monitoring System with CompactPCI® PlusIO (2010-10-07)

» Simulation Computer for Training Application with CompactPCI® PlusIO (2010-02-26)

» Recording Image Data from a Mobile Camera with CompactPCI® PlusIO (2010-02-19)

» Mechanics for CompactPCI® Serial: a comparison with familiar architectures such as VPX and MicroTCA (2010-01-29)

» Power Supply for CompactPCI® PlusIO in Accordance with EN 50155 (2010-01-29)

» Harsh Requirements for CompactPCI® PlusIO in Accordance with EN 50155 (2009-12-16)

» CompactPCI® Gets a Plus with an IO and a Serial Companion Specification (2009-12-04)

» Data Management for Mobile Security Application with CompactPCI® PlusIO (2009-12-02)

» Universal Rear I/O Module for CompactPCI® PlusIO (2009-11-19)

» CompactPCI® PlusIO versus MicroTCA (2009-11-13)

» Layout Rules for CompactPCI® PlusIO Boards (2009-11-04)

» User Specific I/O on CompactPCI® PlusIO (2009-10-22)

» Signal integrity on CompactPCI® Serial backplanes (2009-10-15)

» CompactPCI® PlusIO Implementation Rules for Guaranteeing Interoperability (2009-10-08)

» Ethernet Standards for CompactPCI® PlusIO (2009-10-05)

» PCI Express® Configuration Possibilities with CompactPCI® PlusIO (2009-09-23)

» SATA HDD/SSD Shuttle for CompactPCI® Serial Systems (2009-09-10)

» RAID Systems with CompactPCI® Serial (2009-08-24)

» Hybrid backplanes for CompactPCI® and CompactPCI® PlusIO (PICMG 2.30) (2009-07-21)

» Standard Backplanes for CompactPCI® Serial (PICMG CPCI-S.0) (2009-06-19)

» CompactPCI® Serial Rear I/O (2009-06-10)

» CompactPCI® Serial Mesh Architecture (2009-06-03)

» The Star Topology of CompactPCI® Serial und CompactPCI® Plus IO (2009-06-02)

» Standardization of CompactPCI® Serial: what does PICMG bring to the table? (2009-05-14)

» Connector Concept for CompactPCI® Serial (CPCI-S.0) (2009-05-08)

» 3M Ultra Hard Metric (UHM) Connector - The next generation 2mm Hard Metric System (2009-04-27)

» Standard Backplanes for CompactPCI® PlusIO (PICMG 2.30) and CPCI-S.0 (2009-04-02)

» CompactPCI® PlusIO Rear I/O (2009-03-20)

» CompactPCI® Serial and Rear I/O (2009-03-05)

» Migration from CompactPCI® to CompactPCI® Serial (2009-02-20)

» CompactPCI® PlusIO and CompactPCI® Serial System Architecture (2009-02-20)

» CompactPCI® and CompactPCI® Express System Architecture (2009-02-06)

» What is CompactPCI® Serial? (2009-01-14)