2009-09-10, Michael Plannerer
This carrier for 2.5" SATA hard disk drives or solid state disk drives is an example for a peripheral board for CompactPCI® Serial systems. It uses the SATA/SAS signals on the backplane defined for CompactPCI® Serial. This way each peripheral slot can be used as a hard disk slot and for building RAID systems. As the new standard allows eight peripheral slots, up to eight hard disks can be directly controlled by the system slot. If a CompactPCI® PlusIO CPU board is used in the system slot, as many as four hard disks can be directly controlled. The data transfer rate only depends on the used storage medium, while the RAID level is determined by the system slot CPU.
CompactPCI® Serial defines new high-frequency connectors, six of which with a maximum of 184 pin pairs can be used on a single Eurocard. As the mostly-used signals like SATA/SAS, USB and PCIe® x1 can be accommodated on one connector, peripheral boards as a rule only need the P1 connector (six rows with 4 pin pairs each). The signal pins of the rugged connector are protected by a housing on all four sides.
As an option, the board supports hot-plug and is equipped with 4 status LEDs on the front panel. It is qualified for a temperature range of -40 to +85°C and complies with the requirements of the railway standard EN 50155.
SATA HDD/SSD Shuttle
As a rule CompactPCI® Serial peripheral boards only need the P1 connector.
Michael Plannerer, Product Manager MEN Mikro Elektronik
German version on ElektronikPraxis: SATA HDD/SSD-Shuttle für CompactPCI-Plus-Systeme
» The Future is Serial: CompactPCI® Serial (2011-12-23)
» Legacy Interface Concept for CompactPCI® Serial (2011-12-02)
» Ethernet Switch Functionality for CompactPCI® Serial (2011-11-30)
» 6U CompactPCI® Parallel/Serial Hybrid Systems (2011-11-26)
» 6U Backplanes for CompactPCI® Serial (2011-11-23)
» Conductive Cooling with CompactPCI® Serial (2011-11-17)
» Connector Layout and Coding with CompactPCI® Serial (2011-11-02)
» High-Performance Graphics on CompactPCI® Serial (2011-10-21)
» Building Clusters with CompactPCI® Serial (2011-10-15)
» Mixed Doubles: CompactPCI® Serial and CompactPCI® 2.0 (2011-10-13)
» Application-Specific Backplane Architectures with CompactPCI® Serial (2011-09-16)
» Ethernet Extensions for CompactPCI® Serial (2011-09-02)
» CompactPCI® PlusIO and CompactPCI® Serial capture the systems market (2011-08-27)
» CompactPCI® Serial for Safety-Relevant Architectures (2011-08-20)
» CompactPCI® Serial Ethernet Mesh Architecture (2011-08-06)
» CompactPCI® Serial Ethernet Star Architecture (2011-07-23)
» CompactPCI® Serial - Why is it a PICMG Standard? (2011-06-17)
» CompactPCI® Serial Star Topologies, Part 2 (2011-05-12)
» CompactPCI® Serial Star Topologies, Part 1 (2011-03-21)
» CompactPCI® Serial - The Guide Element (2011-03-10)
» Hot-Plug Functionality with CompactPCI® Serial, Part 2 (2011-02-05)
» Hot-Plug Functionality with CompactPCI® Serial, Part 1 (2011-02-03)
» XMC Carrier Board for CompactPCI® Serial (2010-12-23)
» Mezzanine Cards on CompactPCI® Serial (2010-12-22)
» PCI Express® Mini Card Carrier for CompactPCI® Serial (2010-12-21)
» USB Support with CompactPCI® Serial (2010-12-06)
» Physical Addressing with CompactPCI® Serial (2010-11-22)
» Standardized Rear I/O for CompactPCI® Systems Thanks to CompactPCI® PlusIO (2010-11-13)
» Rear I/O with 6U CompactPCI® Serial (2010-11-06)
» P0 Adds Power to CompactPCI® Serial on 6U (2010-10-30)
» CompactPCI® Serial in 6U Format (2010-10-23)
» Ecosystem for CompactPCI® Serial (CPCI-S.0) (2010-10-15)
» First Single-Board Computer according to CompactPCI® Serial Standard (2010-10-14)
» CompactPCI® Serial - a Base Specification (2010-10-08)
» Highly Networked Camera Monitoring System with CompactPCI® PlusIO (2010-10-07)
» Simulation Computer for Training Application with CompactPCI® PlusIO (2010-02-26)
» Recording Image Data from a Mobile Camera with CompactPCI® PlusIO (2010-02-19)
» Power Supply for CompactPCI® PlusIO in Accordance with EN 50155 (2010-01-29)
» Harsh Requirements for CompactPCI® PlusIO in Accordance with EN 50155 (2009-12-16)
» CompactPCI® Gets a Plus with an IO and a Serial Companion Specification (2009-12-04)
» Data Management for Mobile Security Application with CompactPCI® PlusIO (2009-12-02)
» Universal Rear I/O Module for CompactPCI® PlusIO (2009-11-19)
» CompactPCI® PlusIO versus MicroTCA (2009-11-13)
» Layout Rules for CompactPCI® PlusIO Boards (2009-11-04)
» User Specific I/O on CompactPCI® PlusIO (2009-10-22)
» Signal integrity on CompactPCI® Serial backplanes (2009-10-15)
» CompactPCI® PlusIO Implementation Rules for Guaranteeing Interoperability (2009-10-08)
» Ethernet Standards for CompactPCI® PlusIO (2009-10-05)
» PCI Express® Configuration Possibilities with CompactPCI® PlusIO (2009-09-23)
» RAID Systems with CompactPCI® Serial (2009-08-24)
» Hybrid backplanes for CompactPCI® and CompactPCI® PlusIO (PICMG 2.30) (2009-07-21)
» Standard Backplanes for CompactPCI® Serial (PICMG CPCI-S.0) (2009-06-19)
» CompactPCI® Serial Rear I/O (2009-06-10)
» CompactPCI® Serial Mesh Architecture (2009-06-03)
» The Star Topology of CompactPCI® Serial und CompactPCI® Plus IO (2009-06-02)
» Standardization of CompactPCI® Serial: what does PICMG bring to the table? (2009-05-14)
» Connector Concept for CompactPCI® Serial (CPCI-S.0) (2009-05-08)
» 3M Ultra Hard Metric (UHM) Connector - The next generation 2mm Hard Metric System (2009-04-27)
» Standard Backplanes for CompactPCI® PlusIO (PICMG 2.30) and CPCI-S.0 (2009-04-02)
» CompactPCI® PlusIO Rear I/O (2009-03-20)
» CompactPCI® Serial and Rear I/O (2009-03-05)
» Migration from CompactPCI® to CompactPCI® Serial (2009-02-20)
» CompactPCI® PlusIO and CompactPCI® Serial System Architecture (2009-02-20)
» CompactPCI® and CompactPCI® Express System Architecture (2009-02-06)